--- title: Virtual Machine Installation (ESXi) slug: edgemanager/quickstart-guide/installation-and-deployments/virtual-machine-installation-esxi description: You can install the Litmus Edge Manager on a virtual machine using VMWare ESXi. docTags: createdAt: 2022-06-29T16:18:45.000Z --- You can install the Litmus Edge Manager on a virtual machine using VMWare ESXi. The virtual machine that runs Litmus Edge Manager uses the system time of the host environment. To ensure that timestamps of collected data are as universal as possible, we recommend setting the system time of the host environment to the UTC time zone. The virtual machine that runs Litmus Edge Manager uses the same physical network card as the host environment. To ensure that the Litmus Edge Manager can communicate with data sources (edge devices) and are accessed through the Web UI, we recommend that you consolidate your network to ensure that communication can be established. A typical Litmus Edge Manager virtual file for ESXi deployment adheres to the following naming convention: `.ova`. # Default Login Credentials Refer to the following default login credentials when logging in the first time to different areas of Litmus Edge Manager (LEM). ## Terminal User Interface - **Login/username**: em\_setup - **Password**: edgemanager ## LEM Web UI - **Login/username**: demo - **Password**: demo ## LEM Admin Console - **Login/username**: admin - **Password**: admin ## Keycloak - **Login/username**: kadmin - **Password**: kadmin # Before You Begin - Configure the docker bridge network. By default, this installation allocates the subnet `172.17.0.0/16`. Make sure that this does not conflict with your host environment network configuration. :::hint{type="success"} **Tip**: To reconfigure the docker bridge network, please refer to this [docker guide](https://docs.docker.com/network/bridge/). ::: - Set up proxies to access Litmus Edge Manager behind the company firewall. - Install ESXi v6.7 or higher. See [VMware](https://www.vmware.com/worldwide.html) for more information. - Obtain a valid `.ova` file. Contact Litmus or download the file from the [Customer Portal](https://portal.litmus.io). To use ESXi to install Litmus Edge Manager, you will need to do the following. - Step 1: Install the Virtual Machine (ESXi) - Step 2: Log in to the Litmus Edge Manager (LEM) UI - Step 3: Verify Trial License and Register a Litmus Edge Manager License To jump to a specific section, refer to the Table of Contents on the right side and click the corresponding step. # Step 1: Install the Virtual Machine (ESXi) You will first need to install the virtual machine that will run Litmus Edge Manager. **To install the virtual machine:** 1. Start the **VMWare application **and log in. ![](https://api.archbee.com/api/optimize/SSUUxKZUk9bFTEPNn_6Zo/mr5EzcIW-n51dBQsfQKHR_wigvenbr1kxswbpqliirfvmware-esxi-login.png "EsXI Login Page") 2. From the *VMWare Navigator* pane, click **Virtual Machines** and then click **Create / Register.** The *New virtual machine* dialog box appears. ![](https://api.archbee.com/api/optimize/SSUUxKZUk9bFTEPNn_6Zo/RNd9ypGDKyQDkvNNYkRYj_wnhw1dldifuju7jc3pfgyvmware-esxi-create.png "Create/Register VM using EsXi VM Navigator pane") 3. Select **Deploy a virtual machine from an OVF or OVA file.** ![](https://api.archbee.com/api/optimize/SSUUxKZUk9bFTEPNn_6Zo/KpF70L8i0Ei1_IwPB_ZQ3_-gyahbwhkuvaufeh3gj4vmware-esxi-deploy.png "Select creation type panel") 4. From the *Select OVF and VMDK files* screen, do the following: - Enter a name in the **Enter a name for the virtual machine** field. - Click the **Click to select files or drag/drop** box, navigate to an OVA file on your hard drive, and then click **Open**. ![](https://api.archbee.com/api/optimize/SSUUxKZUk9bFTEPNn_6Zo/gSp1SprZYL_4CrH18PjFX_eao45xux4cwcb606ic72rvmware-esxi-select.png "Select OVF/VDMK file panel") - Click **Next.** 5. From the **Select storage** screen, view the information. Select the available datastore and then click **Next**. In this example, the available datastore is `datastore1`. ![](https://api.archbee.com/api/optimize/SSUUxKZUk9bFTEPNn_6Zo/e3w9-VTOQSBrFPNFicKWX_twvhblllqu2c9nulpzlovmware-esxi-storage.png "Select storage panel") 6. From the **Deployment options** screen, review the options, and then click **Next**. ![](https://api.archbee.com/api/optimize/SSUUxKZUk9bFTEPNn_6Zo/MtoFysmkIw7S-Yg0TIOjq_puyci0fo5l747wssaqhshvmware-esxi-options.png "Deployment option panel") 7. From the **Ready to complete **screen, click **Finish**. The *VMWare ESXi browser* includes the new virtual machine. This will begin the import of the OVA file from Step 4.2 and then the virtual machine creation. Progress can be viewed in the *Recent Tasks bar*. A successfully imported message will be shown once complete. ![](https://api.archbee.com/api/optimize/SSUUxKZUk9bFTEPNn_6Zo/b5PiTFuFBabFRlJsJ_JBs_7yyemdax3-ocsjfkbbvppvmware-esxi-ready.png "Ready to complete panel") 8. Check the **Result** column in the *Recent Tasks* pane for a **Completed successfully** link. 9. Double-click the new virtual machine name. The *Navigator* pane displays the selected virtual machine name and the *Browser* pane displays details for the new virtual machine. ![](https://api.archbee.com/api/optimize/SSUUxKZUk9bFTEPNn_6Zo/x_6Pfw2TolKAtEcM3jvTb_kabgzrszqeofa2hp0y4wyvmware-esxi-details.png "Successfully generated virtual machine ") 10. (Optional) Click **Actions **to open a dropdown menu and click **Edit settings**. ![](https://api.archbee.com/api/optimize/SSUUxKZUk9bFTEPNn_6Zo/Vrj5mno6yZzoc1HU5S02i_umxmoofwwejvvo6sfvstsvmware-esxi-action-edit-settings.png "Actions > Edit Settings option") 11. Configure `CPU`/ `Memory`/ `Hard disk 1`/ `Network Adapter 1` as needed for your particular use case. **Important: **Learn more about the [System and Minimum requirement ](docId\:vcocNbL2DlgAGwsJ3YCdm) for Litmus Edge Manager deployment. ![](https://api.archbee.com/api/optimize/SSUUxKZUk9bFTEPNn_6Zo/-VIzckAZgnjFX6cO5d-xJ_gmmurbfcwnutldf3tazyxvmware-esxi-action-edit-settings-options-1.png "Customizing LEM memory/hard disk/network adapter") 12. Click **Save** when you have finished configuring your ESXi Virtual Machine. 13. Click the **Terminal **window. The *Terminal* window opens. 14. Copy the IP address. :::hint{type="success"} **Tip**: You can change your settings using the Terminal User interface (TUI). To log in using the Terminal window, refer to the *Default Login Credentials* section above. ::: # Step 2: Log in to the Litmus Edge Manager (LEM) Web UI After installing the virtual machine, you can then log in to Litmus Edge Manager with a browser. **To log in to LEM Web UI:** 1. Open a new incognito browser window and paste the IP address into the **URL** field. The application initializes, and then the *Log In* screen appears. 2. Enter the default credentials. Refer to the *Default Login Credentials* section above. 3. Change your password to activate your account, and then click** Submit**. The *Litmus Edge Manager* application opens. :::hint{type="info"} **Note**: You must change your password after the first log in. ::: # Step 3: Verify Trial License and Register a Litmus Edge Manager License After the Litmus Edge Manager is successfully installed, it will automatically be installed with a trial license. **To verify the trial license**: 1. From the Navigation panel, select **Settings**. The* Settings* pane appears. 2. From the *Settings* pane, select **Licenses**. 3. From *Licenses*' *Available Licenses* section, view the license list. Initially, the device operates on a trial license. You will eventually need to register a Litmus Edge Manager license once the trial license expires. To register a Litmus Edge Manager license, see [Site and Node-Locked License Overview for Litmus Edge Manager](docId\:Jvibd0MBSj97ZcPDfhab9).