--- title: Software Updates slug: litmusedge-v2/quickstart-guide/installation-and-deployments/software-updates description: You have several options for updating your version of Litmus Edge. docTags: createdAt: 2022-06-03T18:52:05.000Z --- :::hint{type="warning"} **Important:** For a seamless upgrade experience, you must follow the correct upgrade path. Skipping a significant LTS version may cause issues with the upgrade process. When you upgrade, you must upgrade to version 3.16.10 or 3.16.11. For specific upgrade paths, see [Upgrade Paths](docId:_AkKnwhlj_Ta7Axm4ZCkb). ::: You have several options to upgrade Litmus Edge. If you need to download an updated version of Litmus Edge, visit [Central Portal](https://portal.litmus.io/). The upgrade process preserves your data and existing configurations. After the Litmus Edge software has been installed on a device, this upgrade process can be used throughout the lifetime of the device. # Important - You can't downgrade to a lower version. - If needed, you can upgrade to the same version you're currently on. For example, if your current version is 3.3.1, you can upload the 3.3.1 UPD file again to your Litmus Edge instance. - An upgrade to an internal prerelease version is possible, but contains a warning. Prerelease versions are not upgradeable. - Creating a backup prior to upgrading is recommended. - You cannot upgrade if your controller is IDE. You must have a SATA controller to upgrade. - If you want the same edge device configuration and setup on a fresh installation or with an update, you can use a template. See [Templates](docId\:Me1x3I4rPT_IIgNPCY1GA) for more information. :::hint{type="danger"} **Caution**: Software upgrades haven’t been validated yet on VirtualBox 6.1.x. An upgrade on VirtualBox 6.1.x may result in a corrupted and unrecoverable Litmus Edge instance. ::: # Upgrade Paths :::hint{type="warning"} **Important**: Before upgrading, review the list of planned [Deprecated Drivers](docId:8O4KSDuaFz6jcegj0Whs4) so that you can migrate to any recommended replacement drivers. ::: Refer to the following table for specific upgrade paths depending on your current version. The general upgrade path is earlier Litmus Edge version > 3.5.6 > 3.11.6 > latest Litmus Edge version. | **Current version** | **Latest version (3.16.11)** | | ------------------- | ---------------------------------------------------------- | | 3.2.x | 3.2.3 > 3.2.8 > 3.2.11 > 3.2.12 > 3.5.6 > 3.11.6 > 3.16.11 | | 3.3.1 and 3.3.2 | 3.5.6 > 3.11.6 > 3.16.11 | | 3.5.4 and 3.5.5 | 3.5.6 > 3.11.6 > 3.16.11 | | 3.5.6 | 3.11.6 > 3.16.11 | | 3.11.0 to 3.11.5 | 3.11.6 > 3.16.11 | | 3.16.x | 3.16.11 | # Litmus Edge-Litmus Edge Manager Compatibility Refer to the following table to review which versions of Litmus Edge and Litmus Edge Manager are compatible. | **Litmus Edge version (right)** | **3.0.x** | **3.1.x** | **3.2.x** | **3.3.x** | **3.5.x** | **3.11.x** | **3.16.x** | **4.0.x** | | --------------------------------------- | --------- | --------- | --------- | --------- | --------- | ---------- | ---------- | --------- | | **Litmus Edge Manager version (below)** | | | | | | | | | | **2.x** | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | # Upgrade Litmus Edge You have three options for upgrading Litmus Edge. - Uploading a local file. This is the recommended method. - Upgrading through Litmus Edge Manager. - Downloading an upgrade file. Choose this when the first two methods are unavailable. ## Backup Checklist For backup purposes, you have the option of downloading a backup while doing an upgrade. All configurations and settings are maintained and carried over after upgrading to a new version. - [ ] Download all tags in a CSV file from **DeviceHub **>** Tags**. See [Manage Tags](docId:19FClype_fbpDvcXXWrb4). - [ ] Download flows files from **Flows Manager**. See [Manage a Flows Manager](docId\:rMr7DECUsRYiUGQABxth5). - [ ] Export all flows from your **Analytics** groups. See [Manage Processors and Analytics Flows](docId\:nXq7RMevpWaYbGHEv05q6) for more information. - [ ] Export the OPC UA hierarchy configuration JSON file from the **OPC **>** Hierarchy** pane. See [Manage Nodes](docId\:ydGPriGNV-PZvtbBtulfA) for more information. - [ ] Create a Template from the **Template** tab in **System **> **Backup / Restore**. See the *Download a Template* section in [Manage Templates](docId:5FhKfTw3VsZcZbGP8kzUP). - [ ] Create a support bundle from the **Support** section in **System **>** Support**. See [Support](docId\:B_fktKgx6vTF4dlJbI4jN). - [ ] Make a backup of your system from the **Backup / Restore Configuration** section in **Settings **>** Backup / Restore**. See [Back Up a Device](docId\:CvFMQxZRvcrROUA9avjSe). ## Option 1: Upload Local File This is the recommended upgrade method. ### Before You Begin - Verify the current software version running on Litmus Edge in **System** > **Info** under the *General *section. - Download the correct version of the UPD file you want to upgrade to from the [Central Portal](https://portal.litmus.io/). If needed, review the *Upgrade Paths* section above. ::Image[]{src="https://api.archbee.com/api/optimize/SSUUxKZUk9bFTEPNn_6Zo/OSHlEj20xPjHShZnVR79a_image.png" size="80" width="1046" height="520" position="flex-start" caption="Litmus Edge software version" showCaption="true"} ### Upload a New Version of Litmus Edge Software Once you have the correct UPD file, complete the following steps to upload it to your Litmus Edge instance. **To upload a new version of Litmus Edge:** 1. In Litmus Edge, navigate to **System **> **Device Management**. The *Device Management* pane appears. 2. From the* Software Update* section, click **Upload File**. ::Image[]{src="https://api.archbee.com/api/optimize/SSUUxKZUk9bFTEPNn_6Zo/ju7tgwvSHPyGVazdpW_w7_upload-file-button.png" size="80" width="838" height="124" position="flex-start" caption="Software Update section" showCaption="true"} 3. Select the UPD file and click **Open**. 4. Click **Ok**. Follow the prompts to download a backup before proceeding with the upgrade. You have the option to skip the downloading of a backup but is not recommended. The software loads and installs. The progress of the upload will display. Once finished, the system reboots. 5. Once the system has restarted, close your browser and open the browser again. 6. Clear your browser cache. 7. Log in to Litmus Edge and navigate to **System > Info**. Verify the software version is the updated version. ## Option 2: Upgrade Through Litmus Edge Manager If you have access to Litmus Edge Manager, see the following for upgrading remotely: - [Software Update](docId:2vCj2fF1K9z-dd9sCfn0O) - [Add New Software Update Tasks](docId\:i24b2ShVA4EeOxUPftj_M) ## Option 3: Download Upgrade File If the two options above are not available, then you can download the upgrade file from a URL. ### Before You Begin Visit the [Central Portal](https://portal.litmus.io/) to download the correct UPD file locally to your computer and get the Checksum value you will need. Then, upload the file to your preferred file storage service. You will use the URL to access the file when entering the *Download URL* in Litmus Edge. ### Download the Upgrade File in Litmus Edge **To download the upgrade file in Litmus Edge:** 1. In Litmus Edge, navigate to **System **> **Device Management**. The *Device Management* pane appears. 2. In the *Software Update* section, click **Download from URL**. The *Download Software Update* dialog box appears. ::Image[]{src="https://api.archbee.com/api/optimize/SSUUxKZUk9bFTEPNn_6Zo/ZnYdkUidCkhbgVbBsdGfh_download-from-url-link.png" size="80" width="838" height="124" position="flex-start" caption="Download from URL link" showCaption="true"} 3. Enter or paste the *Download URL* and *Checksum *value in the required fields. Then, click **Start download**. When the download successfully completes, the file displays in the *Update Files* section. 4. For the downloaded file, click **Update**. Follow the prompts to download a backup before proceeding with the upgrade. You have the option to skip the downloading of a backup but is not recommended.