Configure an LTE Modem

you can configure an lte modem either in litmus edge or in the terminal user interface (tui) configure an lte modem in litmus edge to configure an lte modem in litmus edge after completing the basic set up for your lte modem, go to system > network on litmus edge at the top of the page, you can see host and gateway information the gateway ip address comes from the modem software scroll down to the modem configuration section of the page to view the assigned apn for your modem click the edit icon to request a new apn from your network provider insert an lte sim card into litmus edge devices to connect them to the lte network note for more information about your lte modem, go to system > info and scroll to the modem interfaces section connect an lte modem with the terminal interface (tui) to use the tui to connect litmus edge to an lte network perform the initial setup of your modem and enter litmus edge gateway information insert an lte sim card into the device to connect it to the lte network open the tui to see information about your lte connection below eth0 and eth1 information press the f2 key to enter setup make sure to choose an appropriate keyboard layout if this is your first time using the tui the us layout is a standard english keyboard layout use the arrow keys to navigate the tui select configure lte modems and press enter select next with the arrow keys and press enter once again to open the next menu select your lte modem with the arrow keys and the enter key type the apn that you would like to request from your network provider press enter see access the terminal user interface docid\ gsdvwb7qwhdhuqf7fkahc for more information