Brother Ethernet
Review the following information for setting up and configuring the Brother Speedio Ethernet driver.
Litmus Edge Compatible Series
Compatibility parameter | Compatible items |
|---|---|
Driver type | Ethernet |
Validated devices/series |
This driver is experimental. Some features may not work as expected. Certain memory types are read-only on some devices, which prevents write operations. This behavior depends on an unconfirmed combination of device model and firmware versions.
To set up and configure this device in Litmus Edge, you will need to do the following:
- Step 1: Set up and Configure the PLC Device
- Step 2: Set up the PLC Device in Litmus Edge DeviceHub
- Step 3: Configure the List of Registers
Note: If you encounter a 7554 error message or similar on the controller screen after setting up your device, set Display Slave Command Alarms to 0 to remove future notifications.
Step 1: Set up and Configure the PLC Device
Important: When setting up the PLC device, you must activate Remote Operation.
If the device is configured for Ethernet access, find its network parameters. Otherwise, use PLC software on your computer to configure the device for Ethernet access.
Step 2: Set up the PLC Device in Litmus Edge DeviceHub
Configure the following parameters when you Connect a Device with this driver. Update default values to the specific setup of your device.
Parameter | Value |
|---|---|
Type | Brother Industries Ltd |
Driver | Brother Ethernet |
Network Address | The device address you defined in Step 1 |
Port | 10000 |
Step 3: Configure the List of Registers
When you Add a Tag to the connected device, see the following Register Table and Tag Parameters sections.
See the following additional resources if necessary:
Register Table
Name | Value Types | Access Types | Address Format | Min Address | Max Address | Description |
|---|---|---|---|---|---|---|
BDX | word | R/W | DDD | 0 | 255 |
|
BDY | word | R/W | DDD | 0 | 255 |
|
D | word | R/W | DDDD | 0 | 2047 |
|
LD_HS1 | word | R/W | DDDD | 0 | 2047 |
|
LT_CV_HS1 | word | R/W | DDD | 0 | 255 |
|
LT_SV_HS1 | word | R/W | DDD | 0 | 255 |
|
LD_S1 | word | R/W | DDDD | 0 | 2047 |
|
LT_CV_S1 | word | R/W | DDD | 0 | 255 |
|
LT_SV_S1 | word | R/W | DDD | 0 | 255 |
|
LC_CV_S1 | word | R/W | DDD | 0 | 255 |
|
LC_SV_S1 | word | R/W | DDD | 0 | 255 |
|
LD_HS2 | word | R/W | DDDD | 0 | 2047 |
|
LT_CV_HS2 | word | R/W | DDD | 0 | 255 |
|
LT_SV_HS2 | word | R/W | DDD | 0 | 255 |
|
LC_CV_HS2 | word | R/W | DDD | 0 | 255 |
|
LC_SV_HS2 | word | R/W | DDD | 0 | 255 |
|
LD_S2 | word | R/W | DDDD | 0 | 2047 |
|
LT_CV_S2 | word | R/W | DDD | 0 | 255 |
|
LT_SV_S2 | word | R/W | DDD | 0 | 255 |
|
LC_CV_S2 | word | R/W | DDD | 0 | 255 |
|
LC_SV_S2 | word | R/W | DDD | 0 | 255 |
|
X | bit | R/W | HHH | 0 | 1023 |
|
Y | bit | R/W | HHH | 0 | 1023 |
|
BX | bit | R/W | HHH | 0 | 1023 |
|
BY | bit | R/W | HHH | 0 | 1023 |
|
M | bit | R/W | DDDD | 0 | 8191 |
|
LM_HS1 | bit | R/W | DDDD | 0 | 1023 |
|
LM_S1 | bit | R/W | DDDD | 0 | 1023 |
|
LM_HS2 | bit | R/W | DDDD | 0 | 1023 |
|
LM_S2 | bit | R/W | DDDD | 0 | 1023 |
|
MONTR_P_Operation program number | number | R/W | D | 1 | 1 | MONTR-P-Operation program number |
MONTR_P_Edit program number | number | R/W | D | 1 | 1 | MONTR-P-Edit program number |
MONTR_T_Total operation time | number | R/W | D | 1 | 1 | MONTR-T-Total operation time |
MONTR_T_Power on time | number | R/W | D | 1 | 1 | MONTR-T-Power on time |
MONTR_T_Operation time | number | R/W | D | 1 | 1 | MONTR-T-Operation time |
CONTR_C_Count | number | R/W | D | 1 | 4 | MONTR-C-Count |
MONTR_C_Current value | number | R/W | D | 1 | 4 | MONTR-C-Current value |
MONTR_C_Target value | number D | R/W | D | 1 | 4 | MONTR-C-Target value |
MONTR_C_End signal value | number | R/W | D | 1 | 4 | MONTR-End-Signal value |
HEACM_A_no. of calculations | number | R/W | DDD | 1 | 540 | HEACM-A-No. of calculations |
HEACM_A_Correction flag | number | R/W | DDD | 1 | 540 | HEACM-A-Correction flag |
HEACM_A_Z axis travel sum | number | R/W | DDD | 1 | 540 | HEACM-A-Z axis travel sum |
HEACM_A_Spindle rotation sum | number DDD | R/W | DDD | 1 | 540 | HEACM-A-Spingle rotation sum |
HEACM_A_Z axis displacemen | number | R/W | DDD | 1 | 540 | HEACM-A-Z axis displacemen |
HEACM_A_Spindle displacement | number | R/W | DDD | 1 | 540 | HEACM-A-Spindle displacement |
HEACM_A_Z axis displacement sum | number | R/W | DDD | 1 | 540 | HEACM-A-Z axis displacement sum |
HEACM_B_No. of calculations | number | R/W | DDD | 1 | 540 | HEACM-B-No. of calculations |
HEACM_B_Correction flag | number | R/W | DDD | 1 | 540 | HEACM-B-Correction flag |
HEACM_B_Z axis travel sum | number | R/W | DDD | 1 | 540 | HEACM-B-Z axis travel sum |
HEACM_B_Spindle rotation sum | number | R/W | DDD | 1 | 540 | HEACM-B-Spindle rotation sum |
HEACM_B_Z axis displacemen | number | R/W | DDD | 1 | 540 | HEACM-B-Z axis displacemen |
HEACM_B_Spindle displacement | number | R/W | DDD | 1 | 540 | HEACM-B-Spindle displacement |
HEACM_B_Z axis displacement sum | number | R/W | DDD | 1 | 540 | HEACM-B-Z axis displacement sum |
HEACM_B_Spindle displacement sum | number | R/W | DDD | 1 | 540 | HEACM-B-Spindle displacement sum |
HEACM_C_No. of calculations | number | R/W | DDD | 1 | 540 | HEACM-C-No. of calculations |
HEACM_C_Correction flag | number | R/W | DDD | 1 | 540 | HEACM-C-Correction flag |
HEACM-C_Z axis travel sum | number | R/W | DDD | 1 | 540 | HEACM-C-Z axis travel sum |
HEACM_C_Spindle rotation sum | number | R/W | DDD | 1 | 540 | HEACM-C-Spindle rotation sum |
HEACM_C_Z axis displacemen | number | R/W | DDD | 1 | 540 | HEACM-C-Z axis displacemen |
HEACM_C_Spindle displacement | number | R/W | DDD | 1 | 540 | HEACM-C-Spindle displacement |
HEACM_C_Z axis displacement sum | number | R/W | DDD | 1 | 540 | HEACM-C-Z axis displacement sum |
HEACM_C_Spindle displacement sum | number | R/W | DDD | 1 | 540 | HEACM-C-Spindle displacement sum |
MEM_A_Operation program No | number | R/W | D | 1 | 1 | Mem-A-Operation program No |
MEM_A_Operation state | number | R/W | D | 1 | 1 | MEM-A-Operation state |
MEM_A_Inner pallet state | number | R/W | D | 1 | 1 | MEM-A-Inner pallet state |
MEM_A_Spare part usage | number | R/W | D | 1 | 1 | MEM-A-Spare part usage |
MEM_A_Mode | number | R/W | D | 1 | 1 | MEM-A-Mode |
MEM_A_Extended operation | number | R/W | D | 1 | 1 | MEM-A-Extended operation |
MEM_E_Alarm 1 | number | R/W | D | 1 | 1 | MEM-E-Alarm 1 |
MEM_E_Alarm 2 | number | R/W | D | 1 | 1 | MEM-E-Alarm 2 |
MEM_E_Alarm 3 | number | R/W | D | 1 | 1 | MEM-E-Alarm 3 |
MEM_E_Alarm 4 | number | R/W | D | 1 | 1 | MEM-E-Alarm 4 |
MEM_E_Alarm 5 | number | R/W | D | 1 | 1 | MEM-E-Alarm 5 |
MEM_E_Alarm 6 | number | R/W | D | 1 | 1 | MEM-E-Alarm 6 |
MEM_E_Alarm 7 | number | R/W | D | 1 | 1 | MEM-E-Alarm 7 |
MEM_E_Alarm 8 | number | R/W | D | 1 | 1 | MEM-E-Alarm 8 |
MEM_E_Alarm 9 | number | R/W | D | 1 | 1 | MEM-E-Alarm 9 |
MEM_E_Alarm 10 | number | R/W | D | 1 | 1 | MEM-E-Alarm 10 |
MEM_E_Alarm 11 | number | R/W | D | 1 | 1 | MEM-E-Alarm 11 |
MEM_E_Alarm 12 | number | R/W | D | 1 | 1 | MEM-E-Alarm 12 |
MEM_E_Alarm 13 | number | R/W | D | 1 | 1 | MEM-E-Alarm 13 |
MEM_E_Alarm 14 | number | R/W | D | 1 | 1 | MEM-E-Alarm 14 |
MEM_E_Alarm 15 | number | R/W | D | 1 | 1 | MEM-E-Alarm 15 |
MEM_E_Alarm 16 | number | R/W | D | 1 | 1 | MEM-E-Alarm 16 |
MEM_E_Alarm 17 | number | R/W | D | 1 | 1 | MEM-E-Alarm 17 |
MEM_E_Alarm 18 | number | R/W | D | 1 | 1 | MEM-E-Alarm 18 |
PANEL_D_Outer (front) door state | number | R/W | D | 1 | 1 | PANEL-D-Outer (front) door state |
PANEL_D_Inner door state | number | R/W | D | 1 | 1 | PANEL-D-Inner door state |
PANEL_D_Side door state | number | R/W | D | 1 | 1 | PANEL-D-Side door state |
PANEL_K_Mode | number | R/W | D | 1 | 1 | PANEL-K-Mode |
PANEL_K_Screen | number | R/W | D | 1 | 1 | PANEL-K-Screen |
PANEL_K_Block skip | number | R/W | D | 1 | 1 | PANEL-K-Block skip |
PANEL_K_Optional stop | number | R/W | D | 1 | 1 | PANEL-K-Optional stop |
PANEL_K_Single operation | number | R/W | D | 1 | 1 | PANEL-K-Single operation |
PANEL_K_Dry run | number | R/W | D | 1 | 1 | PANEL-K-Dry run |
PANEL_K_Machine lock | number | R/W | D | 1 | 1 | PANEL-K-Machine lock |
PANEL_K_Coolant switch | number | R/W | D | 1 | 1 | PANEL-K-Coolant switch |
PANEL_K_Chip flow switch | number | R/W | D | 1 | 1 | PANEL-K-Chip flow switch |
PANEL_K_Machine light switch | number | R/W | D | 1 | 1 | PANEL-K-Machine light switch |
PANEL_K_Pallet select switch | number | R/W | D | 1 | 1 | PANEL-K-Pallet select switch |
PANEL_S_Rapid traverse override state | number | R/W | D | 1 | 1 | PANEL-S-Rapid traverse override state |
PANEL_S_Cutting feed override state | number | R/W | D | 1 | 1 | PANEL-S-Cutting feed override state |
PANEL_S_Spindle override state | number | R/W | D | 1 | 1 | PANEL-S-Spindle override state |
PANEL_S_Emergency stop | number | R/W | D | 1 | 1 | PANEL-S-Emergency stop |
PANEL_S_Door interlock state | number | R/W | D | 1 | 1 | PANEL-S-Door interlock state |
PANEL_S_Mode change | number | R/W | D | 1 | 1 | PANEL-S-Mode change |
PANEL_S_Data protection | number | R/W | D | 1 | 1 | PANEL-S-Data protection |
PDSP_L01_Language | number | R/W | D | 1 | 1 | PDSP-L01-Language |
PDSP_G01_G0 group | number | R/W | D | 1 | 1 | PDSP-G01-G0 group |
PDSP_G01_G17 group | number | R/W | D | 1 | 1 | PDSP-G01-G17 group |
PDSP_G01_G22 group | number | R/W | D | 1 | 1 | PDSP-G01-G22 group |
PDSP_G01_G40 group | number | R/W | D | 1 | 1 | PDSP-G01-G40 group |
PDSP_G01_G49 group | number | R/W | D | 1 | 1 | PDSP-G01-G49 group |
PDSP_G01_G50 group | number | R/W | D | 1 | 1 | PDSP-G01-G50 group |
PDSP_G01_G50.1 group | number | R/W | D | 1 | 1 | PDSP-G01-G50.1 group |
PDSP_G01_G64 group | number | R/W | D | 1 | 1 | PDSP-G01-G64 group |
PDSP_G01_G54 group | number | R/W | D | 1 | 1 | PDSP-G01-G54 group |
PDSP_G01_G67 group | number | R/W | D | 1 | 1 | PDSP-G01-G67 group |
PDSP_G01_G69 group | number | R/W | D | 1 | 1 | PDSP-G01-G69 group |
PDSP_G01_G80 group | number | R/W | D | 1 | 1 | PDSP-G01-G80 group |
PDSP_G01_G90 group | number | R/W | D | 1 | 1 | PDSP-G01-G90 group |
PDSP_G01_G94 group | number | R/W | D | 1 | 1 | PDSP-G01-G94 group |
PDSP_G01_G98 group | number | R/W | D | 1 | 1 | PDSP-G01-G98 group |
PDSP_M01_M5 group | number | R/W | D | 1 | 1 | PDSP-M01-M5 group |
PDSP_M01_M9 group | number | R/W | D | 1 | 1 | PDSP-M01-M9 group |
PDSP_M01_M221 group | number | R/W | D | 1 | 1 | PDSP-M01-M221 group |
PDSP_M01_M222 group | number | R/W | D | 1 | 1 | PDSP-M01-M222 group |
PDSP_M01_M223 group | number | R/W | D | 1 | 1 | PDSP-M01-M223 group |
PDSP_M01_M224 group | number | R/W | D | 1 | 1 | PDSP-M01-M224 group |
PDSP_M01_M230 group | number | R/W | D | 1 | 1 | PDSP-M01-M230 group |
PDSP_M01_M269 group | number | R/W | D | 1 | 1 | PDSP-M01-M269 group |
PDSP_M01_M401 group | number | R/W | D | 1 | 1 | PDSP-M01-M401 group |
PDSP_M01_M495 group | number | R/W | D | 1 | 1 | PDSP-M01-M495 group |
PDSP_M01_M239 group | number | R/W | D | 1 | 1 | PDSP-M01-M239 group |
PDSP_M01_M250 group | number | R/W | D | 1 | 1 | PDSP-M01-M250 group |
PDSP_M01_M403 group | number | R/W | D | 1 | 1 | PDSP-M01-M403 group |
PDSP_M01_M405 group | number | R/W | D | 1 | 1 | PDSP-M01-M405 group |
PDSP_M01_M407 group | number | R/W | D | 1 | 1 | PDSP-M01-M407 group |
PDSP_M01_M409 group | number | R/W | D | 1 | 1 | PDSP-M01-M409 group |
PDSP_M01_M431 group | number | R/W | D | 1 | 1 | PDSP-M01-M431 group |
PDSP_M01_M441 group | number | R/W | D | 1 | 1 | PDSP-M01-M441 group |
PDSP_M01_M443 group | number | R/W | D | 1 | 1 | PDSP-M01-M443 group |
PDSP_M01_M459 group | number | R/W | D | 1 | 1 | PDSP-M01-M459 group |
PDSP_M01_M481 group | number | R/W | D | 1 | 1 | PDSP-M01-M481 group |
PDSP_M01_M483 group | number | R/W | D | 1 | 1 | PDSP-M01-M483 group |
PDSP_M01_M485 group | number | R/W | D | 1 | 1 | PDSP-M01-M485 group |
PDSP_M01_M487 group | number | R/W | D | 1 | 1 | PDSP-M01-M487 group |
PDSP_M01_M270 group | number | R/W | D | 1 | 1 | PDSP-M01-M270 group |
PDSP_M01_M435 group | number | R/W | D | 1 | 1 | PDSP-M01-M435 group |
PDSP_M01_M419 group | number | R/W | D | 1 | 1 | PDSP-M01-M419 group |
PDSP_M01_M290 group | number | R/W | D | 1 | 1 | PDSP-M01-M290 group |
PDSP_P01_Machine coordinate position X-axis | number | R/W | D | 1 | 1 | PDSP-P01-Machine coordinate position X-axis |
PDSP_P01_Machine coordinate position Y-axis | number | R/W | D | 1 | 1 | PDSP-P01-Machine coordinate position Y-axis |
PDSP_P01_Machine coordinate position Z-axis | number | R/W | D | 1 | 1 | PDSP-P01-Machine coordinate position Z-axis |
PDSP_P01_Machine coordinate position 4th-axis | number | R/W | D | 1 | 1 | PDSP-P01-Machine coordinate position 4th-axis |
PDSP_P01_Machine coordinate position 5th-axis | number | R/W | D | 1 | 1 | PDSP-P01-Machine coordinate position 5th-axis |
PDSP_P01_Machine coordinate position 6th-axis | number | R/W | D | 1 | 1 | PDSP-P01-Machine coordinate position 6th-axis |
PDSP_P01_Machine coordinate position 7th-axis | number | R/W | D | 1 | 1 | PDSP-P01-Machine coordinate position 7th-axis |
PDSP_P01_Machine coordinate position 8th-axis | number | R/W | D | 1 | 1 | PDSP-P01-Machine coordinate position X8th-axis |
PDSP_P02_Relative coordinate position X-axis | number | R/W | D | 1 | 1 | PDSP-P02-Relative coordinate position X-axis |
PDSP_P02_Relative coordinate position Y-axis | number | R/W | D | 1 | 1 | PDSP-P02-Relative coordinate position Y-axis |
PDSP_P02_Relative coordinate position Z-axis | number | R/W | D | 1 | 1 | PDSP-P02-Relative coordinate position Z-axis |
PDSP_P02_Relative coordinate position 4th-axis | number | R/W | D | 1 | 1 | PDSP-P02-Relative coordinate position 4th-axis |
PDSP_P02_Relative coordinate position 5th-axis | number | R/W | D | 1 | 1 | PDSP-P02-Relative coordinate position 5th-axis |
PDSP_P02_Relative coordinate position 6th-axis | number | R/W | D | 1 | 1 | PDSP-P02-Relative coordinate position 6th-axis |
PDSP_P02_Relative coordinate position 7th-axis | number | R/W | D | 1 | 1 | PDSP-P02-Relative coordinate position 7th-axis |
PDSP_P02_Relative coordinate position 8th-axis | number | R/W | D | 1 | 1 | PDSP-P02-Relative coordinate position 8th-axis |
PDSP_P03_Absolute coordinate position X-axis | number | R/W | D | 1 | 1 | PDSP-P03-Absolute coordinate position X-axis |
PDSP_P03_Absolute coordinate position Y-axis | number | R/W | D | 1 | 1 | PDSP-P03-Absolute coordinate position Y-axis |
PDSP_P03_Absolute coordinate position Z-axis | number | R/W | D | 1 | 1 | PDSP-P03-Absolute coordinate position Z-axis |
PDSP_P03_Absolute coordinate position 4th-axis | number | R/W | D | 1 | 1 | PDSP-P03-Absolute coordinate position 4th-axis |
PDSP_P03_Absolute coordinate position 5th-axis | number | R/W | D | 1 | 1 | PDSP-P03-Absolute coordinate position 5th-axis |
PDSP_P03_Absolute coordinate position 6th-axis | number | R/W | D | 1 | 1 | PDSP-P03-Absolute coordinate position 6th-axis |
PDSP_P03_Absolute coordinate position 7th-axis | number | R/W | D | 1 | 1 | PDSP-P03-Absolute coordinate position 7th-axis |
PDSP_P03_Absolute coordinate position 8th-axis | number | R/W | D | 1 | 1 | PDSP-P03-Absolute coordinate position 8th-axis |
PDSP_P04_Remaining distance X-axis | number | R/W | D | 1 | 1 | PDSP-P04-Remaining distance X-axis |
PDSP_P04_Remaining distance Y-axis | number | R/W | D | 1 | 1 | PDSP-P04-Remaining distance Y-axis |
PDSP_P04_Remaining distance Z-axis | number | R/W | D | 1 | 1 | PDSP-P04-Remaining distance Z-axis |
PDSP_P04_Remaining distance 4th-axis | number | R/W | D | 1 | 1 | PDSP-P04-Remaining distance 4th-axis |
PDSP_P04_Remaining distance 5th-axis | number | R/W | D | 1 | 1 | PDSP-P04-Remaining distance 5th-axis |
PDSP_P04_Remaining distance 6th-axis | number | R/W | D | 1 | 1 | PDSP-P04-Remaining distance 6th-axis |
PDSP_P04_Remaining distance 7th-axis | number | R/W | D | 1 | 1 | PDSP-P04-Remaining distance 7th-axis |
PDSP_P04_Remaining distance 8th-axis | number | R/W | D | 1 | 1 | PDSP-P04-Remaining distance 8th-axis |
PDSP_X01_Feed rate | number | R/W | D | 1 | 1 | PDSP-X01-Feed rate |
PDSP_X01_Spindle speed | number | R/W | D | 1 | 1 | PDSP-X01-Spindle speed |
PDSP_X01_Inner pallet state | number | R/W | D | 1 | 1 | PDSP-X01-Inner pallet state |
PDSP_X01_Spindle tool number | number | R/W | D | 1 | 1 | PDSP-X01-Spindle tool number |
PDSP_X01_Next tool number | number | R/W | D | 1 | 1 | PDSP-X01-Next tool number |
PDSP_X01_Magazine number | number | R/W | D | 1 | 1 | PDSP-X01-Magazine number |
PDSP_X01_Door interlock state | number | R/W | D | 1 | 1 | PDSP-X01-Door interlock state |
PDSP_X01_Outer/front door state | number | R/W | D | 1 | 1 | PDSP-X01-Outer/front door state |
PDSP_X01_Inner door state | number | R/W | D | 1 | 1 | PDSP-X01-Inner door state |
PDSP_X01_Slide door state | number | R/W | D | 1 | 1 | PDSP-X01-Slide door state |
PDSP_X01_Rapid traverse override state | number | R/W | D | 1 | 1 | PDSP-X01-Rapid traverse override state |
PDSP_X01_Cutting feed override state | number | R/W | D | 1 | 1 | PDSP-X01-Cutting feed override state |
PDSP_X01_Spindle override state | number | R/W | D | 1 | 1 | PDSP-X01-Spindle override state |
VER_M01_Model | number | R/W | D | 1 | 1 | VER-M01-Model |
VER_V01_Main version | number | R/W | D | 1 | 1 | VER-V01-Main version |
VER_V01_Local version | number | R/W | D | 1 | 1 | VER-V01-Local version |
VER_V01_Slave version | number | R/W | D | 1 | 1 | VER-V01-Slave version |
VER_V01_Main (copy) version | number | R/W | D | 1 | 1 | VER-V01-Main (copy) version |
VER_V01_Slave (copy) version | number | R/W | D | 1 | 1 | VER-V01-Slave (copy) version |
VER_V01_PLC version | number | R/W | D | 1 | 1 | VER-V01-PLC version |
VER_S01_Machine number | number | R/W | D | 1 | 1 | VER-S01-Machine number |
LOG_A01_Status | number | R/W | D | 1 | 1 | LOG-A01-Status |
LOG_A01_Index | number | R/W | D | 1 | 1 | LOG-A01-Index |
LOG_B_yymmddhhmmss | number | R/W | D | 1 | 100 | LOG-B-yymmddhhmmss |
LOG_B_Alarm number | number | R/W | D | 1 | 100 | LOG-B-Alarm number |
LOG_B_Auxilliary number | number | R/W | D | 1 | 100 | LOG-B-Auxilliary number |
LOG_B_Attribute | number | R/W | D | 1 | 100 | LOG-B-Attribute |
LOG_B_Operation program number | number | R/W | D | 1 | 100 | LOG-B-Operation program number |
LOG_B_Edit program number | number | R/W | D | 1 | 100 | LOG-B-Edit program number |
LOG_B_Block number / Job number | number | R/W | D | 1 | 100 | LOG-B-Block number / Job number |
LOG_B_Mode | number | R/W | D | 1 | 100 | LOG-B-Mode |
LOG_B_Screen | number | R/W | D | 1 | 100 | LOG-B-Screen |
LOG_B_Extended operation | number | R/W | D | 1 | 100 | LOG-B-Extended operation |
LOG_C_Machine coordinate position X-axis | number | R/W | D | 1 | 100 | LOG-C-Machine coordinate position X-axis |
LOG_C_Machine coordinate position Y-axis | number | R/W | D | 1 | 100 | LOG-C-Machine coordinate position Y-axis |
LOG_C_Machine coordinate position Z-axis | number | R/W | D | 1 | 100 | LOG-C-Machine coordinate position Z-axis |
LOG_C_Machine coordinate position 4th-axis | number | R/W | D | 1 | 100 | LOG-C-Machine coordinate position 4th-axis |
LOG_C_Machine coordinate position 5th-axis | number | R/W | D | 1 | 100 | LOG-C-Machine coordinate position 5th-axis |
LOG_C_Machine coordinate position 6th-axis | number | R/W | D | 1 | 100 | LOG-C-Machine coordinate position 6th-axis |
LOG_C_Machine coordinate position 7th-axis | number | R/W | D | 1 | 100 | LOG-C-Machine coordinate position 7th-axis |
LOG_C_Machine coordinate position 8th-axis | number | R/W | D | 1 | 100 | LOG-C-Machine coordinate position 8th-axis |
LOG_C_Machine coordinate position 9th-axis | number | R/W | D | 1 | 100 | LOG-C-Machine coordinate position 9th-axis |
LOG_C_Machine coordinate position 10th-axis | number | R/W | D | 1 | 100 | LOG-C-Machine coordinate position 10th-axis |
LOG_C_Remaining distance X-axis | number | R/W | D | 1 | 100 | |
Tag Parameters
- Name: Select a register name from the drop-down list. The available options depend on the names in the register table.
- Value Type: Select a data type from the drop-down list. The available options depend on the register name selected.
- Polling Interval: Enter a value in seconds. This determines how often the tag should poll the register for data.
- Tag Name: Enter a name for the tag.
- Description (Optional): Enter a description for the tag.
- Address: Enter a tag address. The value must in the decimal format, within the allowed min/max range. Omit the leading zeros. The device might use the decimal (D), hexadecimal (H), or octal (O) address format. See the Register Table at the bottom of the dialog box. For Bit tags, append the bit address without the bit separator. The lowercase letters in the address format indicate how many digits you should enter in the Bit address.
- Tag Formula: Enter a formula for the tag to process the generated data. Two variables are permitted: value (current tag value) and timestamp (current tag UNIX time in milliseconds). The following math functions are available:
- sin
- cos
- sqrt
- tan
- power: power(x) performs the operation 10^x.
- log: log(x) is the natural logarithm (the logarithm is in base e).
- exp: exp(x) performs the operation e^x.
- Only Publish on Change of Value: Select the checkbox to only publish NATS messages when the value parameter changes to a new value. Change of Value only applies to boolean, numeric (such as int or float), and simple string data types. It does not apply to complex types, such as JSON or array. Poll-once topics will not be affected by Change of Value settings. These topics will still only see a single message.
- Meta Data: Metadata summarizes basic information about data. This feature allows you to define key-value pair data for the device output payload later on. Metadata can then be used to find, use, and reuse particular instances of data.
Note: If you use special characters in meta data key names, the special characters are replaced with underscore characters in the payload. This can cause two key names to be combined into one. For example, configuring the key names a**b and a&&b will cause only one key name to be created (a__b).