GE Fanuc 90-30 Ethernet (Gen1.3)

review the following information for setting up and configuring the ge fanuc 90 30 ethernet (gen1 3) driver litmus edge compatible series compatibility parameter compatible items driver type ethernet validated devices/series ge fanuc series 90 30 to set up and configure this device in litmus edge, you will need to do the following step 1 set up and configure the plc device step 2 set up the plc device in litmus edge devicehub step 3 configure the list of registers step 1 set up and configure the plc device if the device is configured for ethernet access, find its network parameters otherwise, use otherwise, use plc software on your computer to configure the device for ethernet access refer to the following device details device ge fanuc 90 30 ic693cpu363 device type (driver) ge 90 30 series (ethernet) i/f ethernet step 2 set up the plc device in litmus edge devicehub parameter value type ge fanuc driver ge fanuc 90 30 ethernet (gen1 3) network address the device address you defined in step 1 port 18245 name value types access types address format min address max address i bit bit r/w ddddd 1 32768 q bit bit r/w ddddd 1 32768 m bit bit r/w ddddd 1 32768 g bit bit r/w ddddd 1 32768 t bit bit r/w ddddd 1 32768 sa bit bit r/w ddddd 1 32768 sb bit bit r/w ddddd 1 32768 sc bit bit r/w ddddd 1 32768 s bit bit r/w ddddd 1 32768 i word r/w ddddd 1 32753 q word r/w ddddd 1 32753 m word r/w ddddd 1 32753 g word r/w ddddd 1 32753 t word r/w ddddd 1 32753 sa word r/w ddddd 1 32753 sb word r/w ddddd 1 32753 sc word r/w ddddd 1 32753 s word r/w ddddd 1 32753 r word r/w ddddd 1 32768 ai word r/w ddddd 1 32768 aq word r/w ddddd 1 32768 w word r/w ddddddd 1 5000000