Koyo Ethernet
Review the following information for setting up and configuring the Koyo Ethernet driver.
Compatibility parameter | Compatible items |
Driver type | Ethernet |
Validated devices/series | Koyo DirectLogic Series Automation Direct DirectLogic PLC Series |
To set up and configure this device in Litmus Edge, you will need to do the following:
- Step 1: Set up and Configure the PLC Device
- Step 2: Set up the PLC Device in Litmus Edge DeviceHub
- Step 3: Configure the List of Registers
If the device is configured for Ethernet access, find its network parameters. Otherwise, use DirectSoft6 V6.1 software to configure the device for Ethernet access.
Parameter | Value |
Type | Koyo |
Driver | Koyo Ethernet |
Network Address | The device address you defined during Step 1 |
Network Port | 428784 |
Name | Value Types | Address Format | Min Address | Max Address |
GX | bit | OOOO | 0 | 2047 |
X | bit | OOOO | 0 | 1023 |
SP | bit | OOOO | 0 | 1023 |
GY | bit | OOOO | 0 | 2047 |
Y | bit | OOOO | 0 | 1023 |
C | bit | OOOO | 0 | 1023 |
S | bit | OOOO | 0 | 1023 |
T | bit | OOO | 0 | 255 |
CT | bit | OOO | 0 | 255 |
CCM_31 | word | HHHH | 0 | 17056 |
CCM_32 | word | HHH | 0 | 512 |
CCM_33 | word | HHH | 0 | 832 |
V | word | OOOOO | 0 | 17055 |