OPC UA Client Subscribe (Gen1)

important this driver was deprecated in litmus edge version 3 5 2 we recommend using the gen 2 opc ua client advanced docid\ dymfnqy 4gqlrykf0ckey review the following information for setting up and configuring the opc ua client subscribe (gen1) driver litmus edge compatible series compatibility parameter compatible items driver type ethernet validated devices/series unified automation prosys https //opcfoundation org/certified products replaced with gen 2 driver opc ua client advanced docid\ dymfnqy 4gqlrykf0ckey supported servers opc ua client used to subscribe data from opc ua servers subscribes to the data and waits for opc server to send the update most server vendors recommend to use subscription mode set up the plc device in devicehub configure the following parameters when you connect a device docid\ pal6abpzbrimdu9lvgj30 with this driver update default values to the specific setup of your device parameter value type opc ua driver opc ua client subscribe (gen1) network address the device ip address port 4840 configure the list of registers notes certain device drivers do not have a list of register names in the devicehub add/edit tag form these are free tag plcs for free tag requirements, see device connectivity issues docid\ duoc4zw wfvhotuxjzbzl for the register name, in the devicehub add/edit tag form, map the opc server tags to the client using this format ns=1;s=tagname example ns=2;s=demo static scalar boolean server name currently is not used, however, an entry must be made in this field the browse icon displayed on the device tile means that this plc uses browse tags see add tags docid\ xgwokqbtpevii7or82ll0 for more information when you add tags docid\ xgwokqbtpevii7or82ll0 to the connected device, use the following tag/register mapping table name value type r bool r byte r char r short r word r long r dword r float r double r string r boolarray r bytearray r chararray r shortarray r wordarray r longarray r dwordarray r floatarray r doublearray