Siemens ISO-on-TCP

5min

Review the following information for setting up and configuring the Siemens ISO-on-TCP driver. 
Litmus Edge Compatible Series 
Compatibility parameter
Compatible items
Driver type
Ethernet
Validated devices/series
﻿S7-1200
S7-1500﻿
To set up and configure this device in Litmus Edge, you will need to do the following:
Step 1: Set up and Configure the PLC Device
Step 2: Set up the PLC Device in Litmus Edge DeviceHub
Step 3: Configure the List of Registers
Step 1: Set up and Configure the PLC Device
If the device is configured for Ethernet access, find its network parameters. Otherwise, use TIA Portal V16 software on your computer to configure the device for Ethernet access. 
Step 2: Set up the PLC Device in Litmus Edge DeviceHub
﻿
Parameter
Value
Type
Siemens
Driver
Siemens ISO-on-TCP
Network Address
The device address you defined in Step 1
Port
102
Local TSAP
TCP-2
Remote TSAP
Keep this field empty
﻿
Name
Value Types
Address Format
Min Address
Max Address
Description
Basic
byte, word, dword
DDDD
0
8191
Raw Data, Address is an Offset
Buffer
word
D
0
0
Buffer
﻿
﻿

Compatibility parameter	Compatible items
Driver type	Ethernet
Validated devices/series	S7-1200 S7-1500

Parameter	Value
Type	Siemens
Driver	Siemens ISO-on-TCP
Network Address	The device address you defined in Step 1
Port	102
Local TSAP	TCP-2
Remote TSAP	Keep this field empty

Name	Value Types	Address Format	Min Address	Max Address	Description
Basic	byte, word, dword	DDDD	0	8191	Raw Data, Address is an Offset
Buffer	word	D	0	0	Buffer

Updated 23 Sep 2024

Sinumerik 808D Serial (Gen1)

Siemens S7