Yaskawa MP2300 Ethernet (Gen1.3)

review the following information for setting up and configuring the yaskawa mp2300 ethernet (gen1 3) driver litmus edge compatible series compatibility parameter compatible items driver type ethernet validated devices/series yaskawa mp2300 series https //www yaskawa com/products/motion/machine controllers/mp series/mp2300 to set up and configure this device in litmus edge, you will need to do the following step 1 set up and configure the plc device step 2 set up the plc device in litmus edge devicehub step 3 configure the list of registers step 1 set up and configure the plc device if the device is configured for ethernet access, find its network parameters otherwise, use motionworks iec 2 express 4 5 0 78 software on your computer to configure your device for ethernet access step 2 set up the plc device in litmus edge devicehub parameter value type yaskawa driver yaskawa mp2300 ethernet (gen1 3) network address the device address you defined in step 1 port 44818 input 101 output 111 name value type address format min address max address input word ddd 0 512 output word ddd 0 512 input bit bit ddddd 0 51215 output bit bit ddddd 0 51215