Bottling line

12 min

A 500 mL PET bottling line as five machines in sequence: filler, capper, labeller, checkweigher and case packer, with the accumulation buffers between them. Six devices and 94 tags over Modbus TCP.

Operator view	port 4010
Protocol server	port 5020
Devices and tags	6 devices, 94 tags
Litmus Edge driver	Modbus TCP
Image	bottling-line-demo

Scenarios

Product giveaway. The filler drifts high, every bottle goes out with a little more product than it was sold with, and the checkweigher sees it before anyone counts the stock. The cost is continuous rather than an event.

CIP verification. A clean-in-place cycle is judged against the recipe it was supposed to follow, not against whether it finished. A wash that ran below temperature is a wash that did not happen.

Downtime root cause. When the line stops, the machine that stopped is rarely the machine that caused it. The buffers between machines are what tell you which one to fix.

What it creates on Litmus Edge

Six DeviceHub devices, one per machine plus the CIP skid, with 94 tags between them. A Digital Twin model and instance for each machine. Analytics groups behind the giveaway, CIP and downtime figures on the operator view.

Requirements

Litmus Edge 4.0.x, reachable over HTTPS from the host running the solution

An API token for that Edge, or a username and password, or a client id and secret

Docker, and Docker Compose for the compose deployment

A network path in both directions: the solution reaches the Edge's API, and the Edge reaches this host on the protocol port

Deploy

The solution ships two ways. Use the registry if the host can reach Google Artifact Registry, and the downloaded archive if it cannot.

Option 1: pull from the registry

Requires a read-only registry credential, supplied by Litmus separately.

cat key.json | docker login -u _json_key --password-stdin https://us-docker.pkg.dev

Save this as docker-compose.yml:

services:
  bottling-line:
    image: us-docker.pkg.dev/litmus-customer-facing/litmus-solutions/bottling-line-demo:0.5.0
    container_name: bottling-line-demo
    restart: unless-stopped
    ports:
      - target: 4010
        published: 4010
        protocol: tcp
      - target: 5020
        published: 5020
        protocol: tcp
    environment:
      # Fill these in.
      EDGE_URL: "${EDGE_URL:-}"
      EDGE_API_TOKEN: "${EDGE_API_TOKEN:-}"
      SIM_HOST: "${SIM_HOST:-auto}"
      APPLY_ON_START: "${APPLY_ON_START:-1}"
      EDGE_VERIFY_TLS: "${EDGE_VERIFY_TLS:-0}"
      HTTP_PORT: "4010"
      MODBUS_PORT: "5020"
      AUTOSTART: "1"
      TICK_SECONDS: "0.2"
      SEED: "7"
      LOG_LEVEL: "INFO"

Put the three values in a .env beside the compose file:

EDGE_URL=https://10.0.0.5
EDGE_API_TOKEN=your-token
SIM_HOST=10.0.0.9

docker compose up -d

Open http://localhost:4010. The Edge is configured within about a minute and the page fills in.

The page stays on its waiting panel until the Edge carries this solution's devices. That is deliberate: the simulation does not tick and no value is shown until Litmus Edge is verified to hold the devices and poll them, so nothing on screen can be mistaken for data that never made the trip. With APPLY_ON_START at its default of 1 the solution configures the Edge itself on startup, which takes 30 to 60 seconds. If you set it to 0, or the apply failed, press Apply to Edge in the page header.

Option 2: load the downloaded archive

Download bottling-line-demo-0.5.0-amd64.tar.gz from the solution's page on portal.litmus.io. The archive is the container image, not a source bundle, and needs no registry access.

docker load -i bottling-line-demo-0.5.0-amd64.tar.gz

docker load prints the image it added:

Loaded image: us-docker.pkg.dev/litmus-customer-facing/litmus-solutions/bottling-line-demo:0.5.0

That reference is the one the compose file above already names, so the same docker-compose.yml and .env now work offline with no docker login:

docker compose up -d

To run it without Compose, pass the same three values on the command line:

docker run -d \
  --name bottling-line-demo \
  --restart unless-stopped \
  -p 4010:4010 \
  -p 5020:5020 \
  -e EDGE_URL=https://10.0.0.5 \
  -e EDGE_API_TOKEN=your-token \
  -e SIM_HOST=10.0.0.9 \
  us-docker.pkg.dev/litmus-customer-facing/litmus-solutions/bottling-line-demo:0.5.0

Configuration

Variable	Default	What it does
EDGE_URL	the Docker host	Litmus Edge to configure
EDGE_API_TOKEN	unset	token for that Edge. Or a username and password, or a client id and secret
SIM_HOST	auto	address the Edge polls to reach this solution
APPLY_ON_START	1	configure the Edge on startup
EDGE_VERIFY_TLS	0	1 checks the Edge's certificate
AUTOSTART	1	start the line running
TICK_SECONDS	0.2	simulation step
SEED	7	makes a run repeatable

Operator view

The operator view shows the five machines with their live tags, the bottles moving between them, and the accumulation buffers filling and draining. Above them are the KPIs the Analytics groups produce.

Below the line are the faults. Turn one on and watch it work through the line:

filler mean drifts high, so giveaway climbs

capper jams and holds, cascading back up the line

labeller micro-stops repeatedly

product tank runs low and the filler starves

caustic wash runs below temperature

The page holds until Litmus Edge is verified to be carrying the solution's devices, so what you are looking at is always backed by a real Edge.

Apply and remove

docker compose down

To remove what it created on the Edge, use Clean up in the Solutions provisioner, or call the solution's own clean endpoint. It removes only the six devices, twin models and instances this solution created.

Support

[email protected]