Siemens S7-1200 (Gen1)

important this driver was deprecated in litmus edge version 3 5 2 we recommend using the gen 2 siemens s7 docid\ lhipmt2rl9hnntmv mjp5 or siemens s7 advanced (gen1) docid\ mg oskprv0lvqduytsf8a review the following information for setting up and configuring the siemens s7 1200 (gen1) driver litmus edge compatible series compatibility parameter compatible items driver type ethernet validated devices/series siemens s7 1200 series ethernet to set up and configure this device in litmus edge, you will need to do the following step 1 set up and configure the plc device step 2 set up the plc device in litmus edge devicehub step 3 configure the list of registers step 1 set up and configure the plc device if the device is configured for ethernet access, find its network parameters otherwise, use plc software on your computer to configure your device for ethernet access step 2 set up the plc device in litmus edge devicehub configure the following parameters when you connect a device docid 3eyafppweuvmblcey17sq with this driver update default values to the specific setup of your device parameter value type siemens driver siemens s7 1200 (gen1) network address the device address you defined in step 1 port 102 slot 1 step 3 configure the list of registers when you add tags docid\ xgwokqbtpevii7or82ll0 to the connected device, use the following tag/register mapping table name value type address format min address max address description pe bit ddddd 0 40957 pe word dddd 0 4095 pa bit ddddd 0 40957 pa word dddd 0 4095 mk bit ddddd 0 40957 mk byte, word, dword, real, cou dddd 0 4095 db bit dddddd 0 327677 db byte, sint, word, int, counter ddddd 0 32767