LS Master-K CPU Direct Serial

6 min

Review the following information for setting up and configuring the LS Master-K CPU Direct Serial driver.

Litmus Edge Compatible Series

Compatibility parameter	Compatible items
Driver type	Serial
Validated devices/series	LS Master-K Series: LS Electric K80S LS Electric K120S LS Electric K200S LS Electric K300S LS Electric K1000S

To set up and configure this device in Litmus Edge, you will need to do the following:

Step 1: Set up and Configure the PLC Device

Step 2: Set up the PLC Device in Litmus Edge DeviceHub

Step 3: Configure the List of Registers

Step 1: Set up and Configure the PLC Device

Record the serial communication parameters for the device. Otherwise, follow the steps below.

To configure your device:

Record the following information and refer to it when needed.

Device: LS Industrial Systems

Communication I/F: RS232. Refer to the following figures.

LS Master-K CPU Direct Serial reference

Launch KGL_WE v3.66 Software and then click Project > Option > Connection Option.

Set up the COM port.

Click Connect.

Step 2: Set up the PLC Device in Litmus Edge DeviceHub

Configure the following parameters when you Connect a Device with this driver. Update default values to the specific setup of your device.

Parameter	Value
Type	LS Industrial System
Driver	LS Master-K CPU Direct Serial
Communication Port	Local Serial connection file path
Data Bits	8
Baud Rate	38400
Parity	Even, Odd, None
Stop Bits	1

Step 3: Configure the List of Registers

When you Add a Tag to the connected device, see the following Register Table and Tag Parameters sections.

See the following additional resources if necessary:

Organize Device and Tag Data by Using Metadata

Tag Formula Variables

Register Table

Name	Value Types	Access Types	Address Format	Max Address	Description
PW_Bit	bit	R/W	DDDdd	25515	I/O Relay (P)
KW_Bit	bit	R/W	DDDdd	25515	Keep Relay (K)
MW_Bit	bit	R/W	DDDdd	25515	Auxiliary Relay (M)
LW_Bit	bit	R/W	DDDdd	25515	Link Relay (L)
FW_Bit	bit	R/W	DDDdd	25515	Special Relay (F)
DW_Bit	bit	R/W	DDDDdd	999915	D_bit
TX	bit	R/W	DDD	255
CX	bit	R/W	DDD	255
SX	bit	R/W	DDDD	9999
DW	word	R/W	DDDD	9999	Data Register (D)
CW	word	R/W	DDD	255	Counter Present Value
TW	word	R/W	DDD	255	Timer Present Value
KW	word	R/W	DD	31
PW	word	R/W	DDD	63
FW	word	R/W	DDD	255	Word type for F
LW	word	R/W	DDD	255	Word type for L
MW	word	R/W	DDD	255	Word type for M

Tag Parameters

Name: Select a register name from the drop-down list. The available options depend on the names in the register table.

Value Type: Select a data type from the drop-down list. The available options depend on the register name selected.

Polling Interval: Enter a value in seconds. This determines how often the tag should poll the register for data.

Tag Name: Enter a name for the tag.

Description (Optional): Enter a description for the tag.

Address: Enter a tag address. The value must in the decimal format, within the allowed min/max range. Omit the leading zeros. The device might use the decimal (D), hexadecimal (H), or octal (O) address format. See the Register Table at the bottom of the dialog box. For Bit tags, append the bit address without the bit separator. The lowercase letters in the address format indicate how many digits you should enter in the Bit address.

Tag Formula: Enter a formula for the tag to process the generated data. Two variables are permitted: value (current tag value) and timestamp (current tag UNIX time in milliseconds). The following math functions are available:

sqrt

power: power(x) performs the operation 10^x.

log: log(x) is the natural logarithm (the logarithm is in base e).

exp: exp(x) performs the operation e^x.

Only Publish on Change of Value: Select the checkbox to only publish NATS messages when the value parameter changes to a new value. Change of Value only applies to boolean, numeric (such as int or float), and simple string data types. It does not apply to complex types, such as JSON or array. Poll-once topics will not be affected by Change of Value settings. These topics will still only see a single message.

Meta Data: Metadata summarizes basic information about data. This feature allows you to define key-value pair data for the device output payload later on. Metadata can then be used to find, use, and reuse particular instances of data.

Note: If you use special characters in meta data key names, the special characters are replaced with underscore characters in the payload. This can cause two key names to be combined into one. For example, configuring the key names a**b and a&&b will cause only one key name to be created (a__b).